JDS AIR TECH 2000 MODEL 750 - ER

$555.00

50-8500 JDS Air Tech 2000 - Model 750 ER. Now comes with electronic remote control and washable pre-filter

Workers exposed to fine particulates have experienced a variety of adverse health effects such as eye and skin irritation, allergy, reduced lung function, asthma, and nasal cancer. The JDS Air-Tech high efficiency air filtration unit will dramatically improve the quality of the air that you breathe.
    Machinery is often quipped with a device to collect dust and lint at the source. It will capture large particulates that would normally fall to the floor. Regardless of how well a collection system works, large quantities of microscopic dust still manages to become airborne. JDS Air-Tech filtration systems will remove the microscopic contaminants and create a cleaner, healthier environment.
    A powerful blower motor will quietly circulate and filter the air in your room. All Air-Tech models come fully assembled and ready to use with all filters included. (Just hang it up and plug it in.) No outside venting is required and existing room temperature is not afffected. Our unique slide in slide out filter system allows you to change filters quickly and easily without the use of any tools. The JDS Air-Tech will operate most efficiently mounted to the ceiling. If a ceiling location is not convenient, a tabletop or shelf may be used. The more elevated the location, the less the air flow will be restricted. In larger areas requiring a high volume of air filtration, multiple units can be strategically placed. Our air handling experts can assist you in solving your specific problems.
    Recent medical studies show that breathing fine dust can be hazardous to your health. The National Institute for Occupational Safety and Health (NIOSH) recomends limiting fine dust exposures. The JDS Air-Tech model 750-ER will dramatically improve the quality of the air you breathe. Our units are designed for both small room and industrial use. The model 750-ER is equipped with a convenient LCD remote control with speed and timer functions. This new remote allows you to view all Air-Tech settings in the palm of your hand. To use the timer function just set the arrow in the display window to the appropriate time, and the unit will automatically shut off after you leave the shop. (Settings are from one to four hours.) This model also includes a washable electrostatic pre-filter with a 10 year manufacturers guarantee. The heavy duty 1/4 h.p. motor produces 1,050 CFM of filtered air. This will clean the air in a 30'x30'x8' foot room every ten minutes. For larger areas our models 8-12, 10-16, and 2400 are available.
    Our Model 2400 is designed for commercial and industrial shops. It will exchange the air in a 50'x50'x10' foot area once every ten minutes. For larger areas, multiple units can be strategically placed. This model will remove the airborne dust and lint created by industrial processing. For the removal of chemical odors and fumes that are often associated with finishing procedures, our optional charcoal filter is available.
    Changing the filters for the JDS Air-Tech systems is quick and easy. The pre-filter and the secondary bag filter both slide in and out with ease. The disposable pre-filter will need to be changed more frequently, but can be replaced with an optional washable electrostatic pre-filter. The electrostatic pre-filter does not need to be replaced, just occasionally washed out with a mild kitchen degreaser and water from a low pressure hose. The secondary bag filter and the optional charcoal module (Model 2400) are easily accessible through an access panel door on the side of the unit, and won't need to be changed as often as the pre-filter. The final diffusing filter needs no cleaning and can be replaced with the optional charcoal filter (Model 750-ER, 8-12, and 10-16).
    For ceiling installaton simply remove the four black screws from the top of the unit and install the four eye bolts into these threaded holes. Then hang from ceiling hooks. For tabletop installation, remove screws from the bottom of unit and add the four rubber "feet" (supplied). The JDS Air-Tech will now rest safely on a flat surface with minimal vibration.
    The new JDS Air-Tech 750-ER is the ultimate air cleaner for your shop. It´s equipped with a convenient LCD remote control with speed and timer functions. It includes a washable electrostatic pre-filter that has a 10-year manufacturer´s guarantee. The heavy-duty 1/4 hp motor produces a class-leading, 1,050 cfm unrestricted airflow and provides 350 cfm, 550 cfm, 750 cfm of filtered air. This will clean the air in a 30´x30´x8´ shop once every 10 minutes. The filtration system will remove 99-percent of dust particles as small as five microns and 91-percent of particles as small as one micron in size. For larger areas the models 8-12, 10-16, and 2400 are available. To remove odors, fumes and smoke, our optional charcoal filter is available.
    The JDS Model 2400 is designed for commercial and industrial shops. It will remove the airborne dust that is created by panel saws, planers, shapers, jointers, wide belt sanders, and hand-held power tools. It will very effectively control the ultra fine dust that is produced during the processing of solid surface materials and it will exchange the air in a 50´x50´x10´ area once every ten minutes. For the removal of chemical odors and fumes our optional charcoal module is available.
    The JDS AIR-TECH will dramatically improve the quality of the air in your workshop. Our units are designed for both home and industrial use.

The Remote Control:

The Remote Control has three buttons. To turn the unit on and off press the “on/off” button. To set the speed function press the “speed” button. An arrow in the LCD Display will indicate the speed you have selected (high, medium, or low). If you would like the Air-Tech unit to continue cleaning your shop, after you leave the area, use the convenient timer function. Press the “hour” button to set the amount of time you wish the unit to run, before turning off. An arrow in the LCD display will indicate the time you have selected, (1, 2, 3, or 4 hours). If you choose not to use the timer function, set the hour display to the off position and turn the unit off. If manual operation is required, a sensor panel is located on the right rear corner panel of the unit. You may turn the unit on or off, set the speeds, and the timer function, by simply pressing the corresponding buttons on the sensor panel. (A LED light will come on to indicate the function you have selected). When unpacking your JDS Air-Tech, the remote control, and parts bag, will be attached to the power chord behind the blue discharge filter. BEFORE REPLACING THE DISCHARGE FILTER REMOVE THE STYROFOAM PACKING BLOCKS FROM THE BLOWER WHEEL BEFORE OPERATION. Important: the remote control uses line-of-sight signal. When considering a location for the Air-Tech (especially a ceiling mount) place the unit so that the sensor panel can easily receive a signal from the remote contro

  • Model: 50-8500 - JDS AIR TECH 2000 MODEL 750 - ER
  • Shipping Weight: 75lbs
  • 1 Units in Stock
  • Manufactured by: JDS Company


This product was added to our catalog on Thursday 05 February, 2004.

Your IP Address is: 54.145.45.143
Copyright © 2019 Island Woodcraft Supplies / Woodchips Carving Supplies. Powered by Zen Cart
Parse Time: 0.182 - Number of Queries: 396 - Query Time: 0.0646480136414
if you have to think ... you haven't been Zenned!